PAYNE HEATING AND COOLING / AIR-SOURCE HEAT PUMP

PH5SAN518**AA*

15 SEER2 HP

38 published source records · source checked Sep 21, 2026

SEER2 range15.2–15.5BTU/Wh
HSPF2 range7.8–8BTU/Wh
Cooling capacity17,400–18,900BTU/h

Each efficiency range summarizes published EPA records for PH5SAN518**AA*. The highest SEER2 and HSPF2 may belong to different combinations. Open a source record below to see its ratings and the scope of its component information.

Model patterns and component strings are preserved exactly. How to read model patterns and combinations →

Heating performance & equipment details

Ranges include the 38 published source records for this model. Values in different rows may describe different configurations. Open an individual record to compare values from the same test configuration.

Reported fieldValue / rangeRecords supplying it
SEER2 · BTU/Wh15.2–15.538 / 38
EER2 · BTU/Wh11.7–12.538 / 38
HSPF2 · BTU/Wh7.8–838 / 38
Cooling capacity · BTU/h17,400–18,90038 / 38
Heating capacity at 47°F / 8.3°C · BTU/h16,400–18,30038 / 38
Heating capacity at 17°F / −8.3°C · BTU/h10,500–11,00038 / 38
Heating capacity at 5°F / −15°C · BTU/h8,200–8,60038 / 38
COP at 5°F / −15°C1.88–2.138 / 38
Equipment / loop typeHP - Split System38 / 38
Refrigerant / source-reported GWPR-454B (GWP:470 | Lower GWP)38 / 38
Compressor stagingSingle stage38 / 38
Connected capabilityNo38 / 38

47°F = 8.3°C; 17°F = −8.3°C; 5°F = −15°C. COP is dimensionless. These are reported rating points, not a prediction of a particular home’s heat demand or operating limit.

Matched systems

Each row is one source record. The component column distinguishes listed combinations from outdoor-model ratings without an indoor configuration.

Indoor unit / required furnaceSEER2BTU/WhHSPF2BTU/WhHeating capacity at 5°F / −15°CBTU/hCOP at 5°F / −15°CRecord & comparison
CVAMA3217XMA*+ furnace: PG80MS(A,L)A36070B**AHRI reference: 21419543915.507.8082001.94EPA 3406124 →
CVAMA3217XMA*+ furnace: PG80MS(A,L)A48070B**AHRI reference: 21419546915.507.8082001.94EPA 3406153 →
FMA5X24**AL*AHRI reference: 21442392215.508.0082002.10EPA 3425216 →
CAA**2517AM*+ furnace: PG80VTLB36045A**AHRI reference: 21412667615.207.8084002.04EPA 3398525 →
CAA**1917AM*+ furnace: PG80MS(A,L)A36045A**AHRI reference: 21412477415.207.8084002.02EPA 3398529 →
CAA**1917AM*+ furnace: PG80MS(A,L)A36070A**AHRI reference: 21412480415.207.8084002.04EPA 3398559 →
CAA**1917AM*+ furnace: PG80MS(A,L)A36070B**AHRI reference: 21412483415.207.8083002.04EPA 3398587 →
CAA**2517AM*+ furnace: PG80MS(A,L)A36045A**AHRI reference: 21412608715.207.8084002.04EPA 3398617 →
CAA**2517AM*+ furnace: PG80VTLB36070A**AHRI reference: 21412670615.207.8084002.06EPA 3398671 →
CAA**1917AM*+ furnace: PG80VTLB36070A**AHRI reference: 21412531715.207.8084002.04EPA 3398695 →
CAA**2517AM*+ furnace: PG80MS(A,L)A36070A**AHRI reference: 21412614715.207.8084002.06EPA 3398704 →
CAA**2517AM*+ furnace: PG80MS(A,L)A36070B**AHRI reference: 21412617915.207.8084002.06EPA 3398737 →
CAA**2517AM*+ furnace: PG80MS(A,L)A48070B**AHRI reference: 21412620915.207.8085002.06EPA 3398767 →
CAA**2517AM*+ furnace: PG80VTLB48070B**AHRI reference: 21412671815.207.8085002.04EPA 3398771 →
CAA**2517AM*+ furnace: PG80MS(A,L)A42090B**AHRI reference: 21412624115.207.8084002.04EPA 3398820 →
CAA**1917AM*+ furnace: PG80MS(A,L)A48070B**AHRI reference: 21412486215.207.8084002.04EPA 3398862 →
CAA**1917AM*+ furnace: PG80MS(A,L)A42090B**AHRI reference: 21412489215.207.8084002.04EPA 3398898 →
CAA**2517AM*+ furnace: PG92MSAA48080B**AHRI reference: 21412701715.207.8084002.06EPA 3398944 →
CAA**2517AM*+ furnace: PG80ESUA36040B**AHRI reference: 21412640015.207.8084002.06EPA 3398994 →
CAA**2517AM*+ furnace: PG80MSUA36040B**AHRI reference: 21412646415.207.8084002.06EPA 3399074 →

Sources and documentation

The table uses public EPA ENERGY STAR data. AHRI references are reported by EPA and have not been independently checked with AHRI. Source records do not establish availability, installation suitability or rebate eligibility.

No manufacturer manual has been matched to this model.

Collection method, revision history and known limitations →